Table of Contents
Advertisement
Place the cap on the brake fluid chamber and tighten
the two lateral fixing screws.
FRONT BRAKE CALIPERS SUBSTITUTION
(BRUTALE 750 ORO - 750 S - 910 S)
• It is advisable to remove the brake pads to facilitate
the operation.
• Slightly move the front brake lever towards the right
handgrip and hold it in position with a strap to limit
the outflow of brake fluid during subsequent opera-
tions.
• Taking care not to spill any remains of the brake fluid
H
that may remain inside the brake tubing, remove the
union as indicated in the figure.
Brake liquid can corrode painted surfaces. Clean
immediately any spilt brake liquid using indu-
strial alcohol and drying with compressed air.
• Remove the two caliper fixing screws (1) indicated in
the figure.
• Remove the brake caliper.
N.B.
The removal operation for both the right
and left front calipers is identical.
• To reassemble the front brake calipers proceed in the
reverse order to removal.
• Tighten the relative fixing screws to the prescribed torques.
Torque pressure of the fixing screws of the
front brake calipers: 38
Only grease the first threads of the brake cali-
per fixing screws.
Caliper union torque pressure: 16
• Carry out the reassembly of the brake pads checking
the minimum pad thickness.
• Proceed with the bleeding of the system as described in
page 14.
Brakes
÷
•
42 N
m
÷
•
18 N
m
- 18 -
38÷42 N•m
1
16÷18 N•m
Advertisement
Table of Contents
