Table of Contents
Advertisement
Front wheel bearing check
Only for the B4 910 R - 989 R - 1078 RR models, the
following preliminary operations must be performed:
- Fit the axle on the front wheel.
- Turn in and bring the threaded bushing (Part Code
8000A3469) into contact with the wheel spindle, tighte-
ning it by hand.
With the wheel spindle still mounted to the wheel, rota-
te the wheel to check that the bearings are not pitted
and rotate with a smooth action. Check also for axial
(A) and/or radial (B) movement. If either condition is
verified, substitute the bearings.
Front wheel bearing substitution
F
Brutale 750 ORO - 750 S - 910 S:
Remove the wheel spindle utilising the special tool as
shown in the figure.
Special tool N.800092872
Brutale 910 R:
Remove the threaded bushing, the wheel spindle and
the left and right spacers from the wheel rim.
Utilise the special tool to extract the bearings. To
assemble the tool, it is necessary to remove the screw
(1) and extract the wheel spindle (2); remove the nut
(3) and the flange (4).
Before substituting the bearings as indica-
ted above it is advisable to remove the brake
discs as indicated in chapter "Brakes" to
avoid damaging them.
Special tool N. 800092862
Suspension and wheels
- 8 -
B
A
2
4
1
3
Advertisement
Table of Contents
