Table of Contents
Advertisement
Maintenance
Check again the timing of the engine, ensuring that the
incision stamped on the timing wheel is aligned with
the "tooth" on the engine casing.
B
Continue with the measuring of the play of the follow-
ing valves:
Cylinders 3 and 4 intake valves (n° 5,6,7,8)
Cylinders 2 and 4 exhaust valves (n° 9,10,13,14).
Make a note of the measured values ensuring that they
are scrupulously written in the correct order of the pre-
viously illustrated table.
- 35 -
Advertisement
Table of Contents
