Table of Contents
Advertisement
Remove the retaining ring (1) of the wheel nut.
Remove the rear wheel by removing the polygonal nut,
using the following tools:
Torque wrench
55 mm polygonal spanner
Utilising a torque wrench, slacken the
rear wheel nut.
The polygonal fixing nut of the rear wheel
has a left hand thread. To slacken the nut
it is therefore necessary to turn the
torque wrench in a clockwise direction.
Remove the rear wheel nut.
When reassembling, tighten the rear wheel
N.B.
nut to the prescribed torque pressure.
Rear wheel nut torque pressure: 220 ÷ 240
N•m
Remove the rear wheel taking care to not hit the silen-
cer connecting plate.
N.B.
If this operation is too difficult to carry out,
remove the silencer connecting plate com-
pletely before removing the wheel.
Suspension and wheels
- 45 -
1
F
220÷240 N•m
Advertisement
Table of Contents
