Table of Contents
Advertisement
CHAIN REMOVAL (MY 2008)
Cut the chain utilising the special tool.
Special tool N. 8000B1439
Unscrew bolt (1) so that the tip is retracted into the hex
nut.
This tool coud be applied in any point of
N.B.
the lower section of the chain.
Unscrew shoulder bolt (2) until you can insert the chain
into the special tool. Position the chain breaker (1) so
that the ends of the chain pin can fit into the holes of
the hex nut and bolt (2).
Thread with the fingers the shoulder bolt (2) to put in
phase the chain with the tool.
Screw the bolt (1) until the pin is out of the chain plate
on the wheel side.
Suspension and wheels
- 59 -
2
1
2
1
1
F
Advertisement
Table of Contents
