MV Agusta BRUTALE 750 S Workshop Manual page 316

Carry out the sequence of operations of assembly in
reverse order to removal for the correct assembly of
the frame to the motorcycle.
Tighten the various fixings to the torque pressure
shown in the following diagram.
PART. DESIGN NO. DESCRIPTION
1 800084869
2 800084866
G
3 800084865
4 800084867
5 800086395
6 800084863
7 8J0090426
8 8J0090426
The tightening of the engine mounting screws and the
plates 1 2 3 4 5 6
is effectuated with the motorcycle resting on its wheels
and the engine hanging from the frame.
The tightening of the rear sub-frame screws 7 8 is
carried out by letting the sub-frame drop into position
by its own weight.
Utilise "AGIP GREASE 30" for the screws.
Frame
Front engine mounting screw
Upper engine mounting screw
Lower engine mounting screw
Plate – frame screw
Front fork pin screw
Rear suspension compensator screw
Plate- upper sub-frame fixing screw
Plate- lower sub-frame fixing screw
DIM.
M12x1.25
M12x1.25
M12x1.25
M12x1.25
M15x1.25
M10x1.25
M8x1.25
M8x1.25
- 22 -
TORQUE PRESSURE
N·m Kgm
55/60 5.5/6.0
55/60 5.5/6.0
55/60 5.5/6.0
55/60 5.5/6.0
70/75 7.0/7.5
50/55 5.0/5.5
24/28 2.4/2.8
24/28 2.4/2.8