Table of Contents
Advertisement
Chain lubrication
Lubricate➝
At the first 1000 kilometres and at
6000 kilometres and then at every
B
12000 kilometres
Clean the chain with a clean cloth and/or a jet of air.
The chain is the type with sealing rings (O-
RING); in order to avoid damages you
should not clean the chain using jets of
steam or high pressure water, or using fuel
or cleansing solvents on the market.
Then apply a light and even coating of lubricant on the
whole chain without reaching the surrounding parts, in
particular the tyres.
Use only the lubricant recommended (see
page 11 in this chapter) in order to effec-
tively protect the gearing chain and avoid
from splashing when the motorcycle is run-
ning.
In particular, direct the lubricant jet on the internal links,
in order to lubricate the surface of the O-Rings and
penetrate inside the chain roller.
Maintenance
- 80 -
Advertisement
Table of Contents
