Suspension and wheels
Swingarm pin removal
Before removing the swingarm pin, loosen the suspen-
sion rocker pin and the two engine pins.
Remove the screw (1) on the left side of the vehicle.
Remove the washer and push out the pin manually.
Support the swingarm so that it does not drop to the
ground.
1
Upper chain guide removal
F
Remove the two screws (1) and the relative plates.
Lift up the front part of the chain guide to remove it
from the swingarm (see figure).
1
Repeat the operation on the rear part, where the screw
seat is situated in the swingarm.
- 55 -