Navigation Buttons; Display Page - AMX MVP-9000i-GB Instruction Manual

Setup Page (Cont.)
Navigation Buttons: The buttons along on the left half of the page provide access to secondary Setup pages (see following sections).
Connection Status:
Reboot button:
Shutdown button:
To shut down the panel:
1. Access the Setup page.
2. Press the Shutdown button.
3. Disconnect any power source plugs or USB connections, if necessary.

Navigation Buttons

The following Navigation buttons (FIG. 48) appear on the left side of the Setup page:
Navigation buttons on the Status page
FIG. 48
The six buttons include:
Display: this button opens the Display page (page 46)

Audio: this button opens the Audio page (page 47)

Battery: this button opens the Power Management page (page 48)

Time: this button opens the Date/Time page (page 51)

Panel Info: this button opens the Panel Information page (page 52)

Protected: this button opens the Protected Setup page (page 55)


Display Page

The Display page controls the basic functions of the touch panel display, including the panel brightness.
Display page
FIG. 49
Display Page
Back icon:
WiFi/Wired icon:
Connection Status
icon:
MVP-9000i - Instruction Manual
Displays whether the panel is has external communication, as well as the encryption status of the Master, the
connection type (Ethernet or USB), and to which System the panel is connected.
• The Connection Status field always displays the device number. If the device has not been established on a
network, the device number will read "0".
• Until a connection is established, the message displayed is: "Attempting connection.".
• When a connection is established, the message displayed is either: "Connected via Ethernet "or "Connected via
USB ".
• The word "Encrypted" appears when an encrypted connection is established with a NetLinx Master.
Press this button to reboot the panel.
Press this button to shut off the panel. If the panel is docked in a docking station or otherwise connected to external
power, this button will be disabled
The icon in the upper-left corner of each Setup page allows the user to return to the previously selected page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless
(image of a radio antenna) or Wired (image of three networked computers).
The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection
status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
Setup Pages
46