AMX MVP-9000i-GB Instruction Manual page 48

To use the Test function:
1. Dock the MVP-9000i in a Table or Wall Docking Station prior to testing the battery.
2. Press the Test button.
3. If the battery does not require conditioning, a popup opens that reads "The battery is functioning normally and does not
currently need maintenance. Do you wish to run a maintenance cycle anyway?" (FIG. 54). Press No to close the popup and
return to the Power Management page, and Yes to start the reconditioning process.
Normal battery function popup window
FIG. 54
4. Pressing the Test button while the MVP-9000i is conducting its battery reconditioning process will open a popup window
reading "Battery maintenance is currently in progress. Do you wish to cancel the maintenance cycle?" (FIG. 55). Press No to
continue the battery reconditioning and close the popup window, and press Yes to stop the reconditioning process, close the
popup window, and return to the Power Management page.
Battery maintenance in progress popup window
FIG. 55
5. Pressing the Test button and the battery needs reconditioning opens a popup window reading "The battery is in need of 1
maintenance cycle. One cycle takes 12-16 hours. Do you wish to proceed with a maintenance cycle right now?" (FIG. 56).
Press No to close the popup window without starting battery reconditioning. Press Yes to start the reconditioning process and
close the popup window.
Battery In Need of Maintenance Cycle popup window
FIG. 56
The reconditioning process has a charging and a discharging portion. During the charging portioning of the process, the Display
Timeout will operate per the timings set under the Power Settings section (page 48).
However, during the discharge portion of the reconditioning process, the display is turned on so the battery will discharge as fast as
possible. The Display Brightness should set to 90% or higher so the battery will discharge as fast as possible.
6. If you undock the MVP-9000i from its Docking Station while the panel is in the reconditioning process, a popup window
appears reading "Battery maintenance is paused." (page 51). This popup window will close when the touch panel is re-docked
within the Docking Station.
MVP-9000i - Instruction Manual
Setup Pages
50