AMX MVP-9000i-GB Instruction Manual page 27

4. When disconnecting from a Docking Station, the MVP-9000i will attempt to switch from a Wired to Wireless connection.
If the touch panel is unable to connect to a wireless network, a confirmation window appears warning that the panel will lose
its network connection (FIG. 18).
Press Undock if you still wish to remove the touch panel, or Cancel to keep the panel in the Docking Station. If you do not
choose either option, the undocking attempt will automatically cancel within 15 seconds
"Attempting to Undock" confirmation window
FIG. 18
5. When disconnecting from a Wall Docking Station, wait for the Wall Docking Station to pivot the touch panel away from the wall
(FIG. 19).
MVP-9000i
Ejected position for the MVP-9000i
FIG. 19
6. Remove the device. The device will remain in the ejected position in the MVP-WDS-9 until the MVP-9000i is removed. Wait until
the MVP-WDS-9's ejection door has completely withdrawn before re-installing the MVP-9000i.
MVP-9000i - Instruction Manual
MVP-WDS-9
Accessories
.
29