Panel Runtime Operations; Abeep; Adbeep; Akb - AMX MVP-9000i-GB Instruction Manual

Panel Runtime Operations

Serial Commands are used in Terminal Emulator mode. These commands are case insensitive.
Panel Runtime Operation Commands

ABEEP

ADBEEP

@AKB

AKEYB

AKEYP

AKEYR

@AKP

MVP-9000i - Instruction Manual
Output a single beep even if beep is Off.
Syntax:
"'ABEEP'"
Example:
SEND COMMAND Panel,"'ABEEP'"
Outputs a beep of duration 1 beep even if beep is Off.
Output a double beep even if beep is Off.
Syntax:
"'ADBEEP'"
Example:
SEND COMMAND Panel,"'ADBEEP'"
Outputs a double beep even if beep is Off.
Pop up the keyboard icon and initialize the text string to that specified.
Keyboard string is set to null on power up and is stored until power is lost. The Prompt Text is optional.
Syntax:
"'@AKB-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@AKB-Texas;Enter State'"
Pops up the Keyboard and initializes the text string 'Texas' with prompt text 'Enter State'.
Pop up the keyboard icon and initialize the text string to that specified.
Keyboard string is set to null on power up and is stored until power is lost.
Syntax:
"'AKEYB-<initial text>'"
Variables:
initial text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'AKEYB-This is a Test'"
Pops up the Keyboard and initializes the text string 'This is a Test'.
Pop up the keypad icon and initialize the text string to that specified.
The keypad string is set to null on power up and is stored until power is lost.
Syntax:
"'AKEYP-<number string>'"
Variables:
number string = 0 - 9999.
Example:
SEND COMMAND Panel,"'AKEP-12345'"
Pops up the Keypad and initializes the text string '12345'.
Remove keyboard or keypad that was displayed using 'AKEYB', 'AKEYP', 'PKEYP', @AKB, @AKP, @PKP, @EKP, or @TKP
commands.
Syntax:
"'AKEYR'"
Example:
SEND COMMAND Panel,"'AKEYR'"
Removes the Keyboard/Keypad.
Pop up the keypad icon and initialize the text string to that specified.
Keypad string is set to null on power up and is stored until power is lost. The Prompt Text is optional.
Syntax:
"'@AKP-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@AKP-12345678;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string '12345678' with prompt text 'ENTER PASSWORD'.
Programming
122