Phn-Setup-Domain; Phn-Setup-Enable; Phn-Setup-Password; Phn-Setup-Port - AMX MVP-9000i-GB Instruction Manual

SIP Setup Commands (Cont.)
^PHN-SETUP-
DOMAIN
^PHN-SETUP-
ENABLE
^PHN-SETUP-
PASSWORD
^PHN-SETUP-
PORT
^PHN-SETUP-
PROXYADDR
^PHN-SETUP-
STUNADDR
^PHN-SETUP-
USERNAME
MVP-9000i - Instruction Manual
Sets the realm for authentication.
Syntax:
"'^PHN-SETUP-DOMAIN,<domain>'"
Variable:
domain = The realm used for authentication
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-DOMAIN,asterisk'"
Registers a new user. Once the configuration has been updated, the ENABLE command should be run to re-register the
new user.
Syntax:

"'^PHN-SETUP-ENABLE'"

Sets the user password for the proxy server.
Syntax:
"'^PHN-SETUP-PASSWORD,<password>'"
Variable:
password = The password for the user name
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PASSWORD,6003'"
Sets the port number for the proxy server.
Syntax:
"'^PHN-SETUP-PORT,<port>'"
Variable:
port = The port for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PORT,5060'"
Sets the IP address for the proxy server.
Syntax:
"'^PHN-SETUP-PROXYADDR,<IP>'"
Variable:
IP = The IP address for the proxy server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-PROXYADDR,192.168.223.111'"
Sets the IP address for the STUN server.
Syntax:
"'^PHN-SETUP-STUNADDR,<IP>'"
Variable:
IP = The IP address for the STUN server
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-STUNADDR,192.168.223.111'"
Sets the user name for authentication with the proxy server.
Syntax:
"'^PHN-SETUP-USERNAME,<username>'"
Variable:
username = The user name (usually the phone extension)
Example:
SEND_COMMAND Panel,"'^PHN-SETUP-USERNAME,6003'"
Programming
134