Security Modes - AMX MVP-9000i-GB Instruction Manual

Table of Contents

Advertisement

System Settings - WiFi Tab - Page 2 (Cont.)
AP MAC:
Channel:
Signal Level Value: This indicator displays a description of the signal strength of the Access Point signal.
Signal Level:
Prev.
Site Survey:

Security Modes:

Some encryption and security features may or may not be supported:
Wireless Security Support
802.11a/b/g WiFi card: • Open (Clear Text)
Refer to the Conf iguring Wireless Network Access section on page 33 for more information on configuring the panel for wireless
network access using the various security options.
Security Modes
The Security Modes section on the second page of the WiFi tab has two buttons: Simple and Enterprise. Pressing the Simple button
opens the Wireless Security: Simple Mode popup window (FIG. 73), which offers wireless security options suitable for most home
and office environments such as Open (page 62), WEP (page 62), and WPA-PSK (page 63).
For more secure options, such as for corporate environments, the Wireless Security: Enterprise Mode popup window (FIG. 74) offers
EAP-LEAP (page 65), EAP-FAST (page 66), EAP-PEAP (page 67), EAP-TTLS (page 68), and EAP-TLS (page 70).
Wireless Security: Simple Mode popup window
FIG. 73
Wireless Security: Enterprise Mode popup window
FIG. 74
MVP-9000i - Instruction Manual
This field contains the Access Point MAC address in which the panel is connected. It also is used to display supplicant
status during authentication and association as the panel first connects to the access point.
The RF channel being used for connection to the AP (read -only).
Provides a graphical representation of the Signal Level Value.
Touch this button to return to the first page of the WiFi tab.
Touching this button launches the Wireless Site Survey page. The options on this page allow you to detect ("sniff-
out") all APs transmitting within range of the panel's WiFi card.
Note: Wireless connectivity will be unavailable while running a site survey.
Security for WiFi connections is available in Simple Mode or Enterprise Mode. Touch the appropriate button to open
the pop-up window for each mode.
• Static WEP (64-bit and 128-bit key lengths)
• WPA-PSK
• EAP security (with and without certificates)
Protected Setup Pages
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvp-9000i-gw

Table of Contents