Accessories; Powering The Mvp-Tds-9 - AMX MVP-9000i-GB Instruction Manual

Accessories

Table Docking Station
The Power-over-Ethernet MVP-TDS-9 Table Docking Station (FIG. 6) charges the MVP-9000i and provides a wired Ethernet
connection when the panel is docked. The MVP-TDS-9's sleek design allows the panel to slide into perfect placement in the docking
station and includes password protection support for panel removal. When the MVP-9000i is placed into the PoE docking station, it
automatically switches from wireless to wired Ethernet communication. The Docking Station is available in either black (MVP-TDS-
9-GB, FG5967-10) or white (MVP-TDS-9-GW, FG5967-11).
MVP-TDS-9-GB Table Docking Station - Front
FIG. 6
MVP-TDS-9 Specif ications
Dimensions (HWD): • 6.25" x 11.50" x 5.50" (15.88cm x 29.21cm x 13.97cm)
Weight:
Power
Requirements:
Startup Power
Requirements:
Front
Components:
Rear
Components:
Operating/Storage
Environments:
Included
Accessories
Other AMX
Equipment:

Powering the MVP-TDS-9

The MVP-TDS-9 uses the PS-POE-AT High-Power PoE Injector (FG423-81) to provide direct power for the MVP panel via a standard
Ethernet connection, both for standard function and for charging its internal battery. This also allows a wired Ethernet connection
for the panel, and the panel may be used normally while docked in the MVP-TDS-9 without the need for a wireless connection.
NOTE: Use only the RJ45 plug on the included Ethernet cable with the MVP-TDS-9. Other RJ45 plugs will not f it in the device's jack,
and attempting to use another plug may damage the jack. If necessary, the cable may be spliced and shortened for special
installations.
For both Ethernet connection and for power for the MVP-9000i, the MVP-TDS-9 uses a special Ethernet cable (FIG. 7) in order to
connect to the PS-POE-AT.
MVP-9000i - Instruction Manual
• 1.25 lbs (.57 kg)
• 30 W (Class II listed power supplemented), supplied via the PS-POE-AT High-Power PoE Injector.
• Cradle and panel (not charging): 16 W
• Cradle and panel (charging): 23 W
• Ejection: 23 W
• Docking Station cradle: for supporting the device while connected or charging.
• Release button: before removing the MVP touch panel, press this button to switch the panel from a wired to a
wireless Ethernet connection to its network.
• 12-pin charging connector on bottom of device cradle.
• 2 USB ports on the left side of the device, for firmware or file download to a docked touch panel. These ports may
also be used for using a keyboard and/or mouse with the touch panel.
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Battery Charging Temperature: 0° C (32° F) to 30° C (86° F)
• Operating & Battery Charging Humidity: 20% to 85% RH
• Storage Temperature: -10° C (-14° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
• MVP-TDS-9 Table Docking Station Installation Guide (93-5967-10)
• PS-POE-AT High Power PoE Injector (FG423-81)
• Ethernet cable - black (ECA5967-22BL) (for MVP-TDS-9-GB)
• Ethernet cable - white (ECA5967-22WH) (for MVP-TDS-9-GW)
• MVP-9000i Modero Viewpoint Widescreen Touch Panel with Intercom - Black (FG5967-01)
• MVP-9000i Modero Viewpoint Widescreen Touch Panel with Intercom - White (FG5967-02)
Docking Station cradle
Release button
Accessories
21