AMX MVP-9000i-GB Instruction Manual page 41

Once activated, this page displays links to G4 panels running the latest G4 Web Control feature that were previously set up and
activated on the device.
G4 panels
Manage WebControl Connections page (populated with compatible panels)
FIG. 43
5. Click on the G4 panel name link associated with the target panel. A secondary web browser window appears on the screen
(FIG. 44).
Web Control VNC installation and Password entry screens
FIG. 44
6. Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl application on your
computer. This application contains the necessary Active X and VNC client applications necessary to properly view and control
the panel pages from your computer.
NOTE: The G4 Web Control application is sent by the panel to the computer that is used for communication. Once the
application is installed, this popup will no longer appear. This popup will only appear if you are connecting to the target panel
using a different computer.
7. Some situations might display a Connection Details dialog (FIG. 45) requesting a VNC Server IP Address. This is the IP Address
not of the Master but of the target touch panel. Depending on which method of communication is being used, it can be found
in either:
Wired Ethernet - System Settings > IP Settings section within the IP Address field.

Wireless - Wireless Settings > IP Settings section within the IP Address field.

If this field does not appear, continue to step 9.
Connection Details dialog
FIG. 45
8. If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password dialog box appears
on the screen within the secondary browser window.
MVP-9000i - Instruction Manual
Compatible
devices field
(showing G4
WebControl links)
Compression
Options
IP Address of touch panel
- obtained from WiFi tab of
the System Settings page
(MVP-9000i)
Configuring Communication
43