Pht; Ppa; Ppf; Ppg - AMX MVP-9000i-GB Instruction Manual

Page Commands (Cont.)

@PHT

Set the hide effect time for the specified popup page.
Syntax:
Variable:
Example:

@PPA

Close all popups on a specified page. If the page name is empty, the current page is used. Same as the 'Clear Page' command
in TPDesign4.
Syntax:
Variable:
Example:

@PPF

Deactivate a specific popup page on either a specified page or the current page. If the page name is empty, the current page is
used (see example 2). If the popup page is part of a group, the whole group is deactivated. This command works in the same
way as the 'Hide Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:

@PPG

Toggle a specific popup page on either a specified page or the current page. If the page name is empty, the current page is
used (see example 2). Toggling refers to the activating/deactivating (On/Off) of a popup page. This command works in the
same way as the 'Toggle Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Example 2:

@PPK

Kill refers to the deactivating (Off) of a popup window from all pages. If the pop-up page is part of a group, the whole group is
deactivated. This command works in the same way as the 'Clear Group' command in TPDesign 4.
Syntax:
Variable:
Example:
MVP-9000i - Instruction Manual
"'@PHT-<popup page name>;<hide effect time>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
hide effect time = Given in 1/10ths of a second.
SEND_COMMAND Panel,"'@PHT-Popup1;50'"
Sets the Popup1 hide effect time to 5 seconds.
"'@PPA-<page name>'"
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPA-Page1'"
Close all pop-ups on Page1.
"'@PPF-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPF-Popup1;Main'"
SEND_COMMAND Panel,"'@PPF-Popup1'"
Deactivates the popup page 'Popup1' on the current page.
"'@PPG-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPG-Popup1;Main'"
Toggles the popup page 'Popup1' on the 'Main' page from one state to another (On/Off).
SEND_COMMAND Panel,"'@PPG-Popup1'"
Toggles the popup page 'Popup1' on the current page from one state to another (On/Off).
"'@PPK-<popup page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
SEND_COMMAND Panel,"'@PPK-Popup1'"
Kills the popup page 'Popup1' on all pages.
Programming
92