Phn-Linestate; Phn-Msgwaiting; Phn-Privacy; Phn-Redial - AMX MVP-9000i-GB Instruction Manual

SIP Commands - Panel to Master (Cont.)

^PHN-LINESTATE

^PHN-MSGWAITING

^PHN-PRIVACY

^PHN-REDIAL

^PHN-TRANSFERRED

MVP-9000i - Instruction Manual
SIP call linestate status - Indicates the current state of each of the available connections used to manage calls.
• Syntax:
"'^PHN-LINESTATE,<connection id>,<state>,<connection id>,<state>,..., SIP,<extn>'"
• Variables:
connection id = The identifying number of the connection.
state = IDLE, HOLD, or CONNECTED
extn = The local extension of this panel (see Example)
• Example:
^PHN-LINESTATE,1,IDLE,2,CONNECTED,SIP,1234
The panel sent a command status to the master indicating line 1 is idle and line 2 is connected and this is
extension 1234.
SIP call message waiting status - Indicates the number of messages waiting the user's voice mail box.
• Syntax:
"'^PHN-MSGWAITING,<messages>,<new message count>,<old message count>,
<new urgent message count>,<old urgent message count>'"
Variables:
• messages = 0 or 1 (1 indicates new messages)
• new message count = The number of new messages.
• old message count = The number of old messages.
• new urgent message count = The number of new messages marked urgent.
• old urgent message count = The number of old messages marked urgent.
• Example:
^PHN-MSGWAITING,1,1,2,1,0
The panel sent a command status to the master indicating there are calls waiting (1 new, 2 old, 1 new
urgent, 0 old urgent).
SIP call privacy status - Indicates the state of the privacy feature.
• Syntax:
"'^PHN-PRIVACY,<state>'"
• Variables:
state = 0 (Disable) or 1 (Enable)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
• Example:
^PHN-PRIVACY,0
The panel sent a command status to the master indicating there the call privacy is disabled.
SIP call redial status - Indicates the panel is redialing the number.
• Syntax:
"'^PHN-REDIAL,<number>'"
• Variable:
number = The phone number to dial.
• Example:
^PHN-REDIAL,2125551000
The panel sent a command status to the master indicating the number 2125551000 is being redialed.
SIP call transferred status - Indicates a call has been transferred.
• Syntax:
"'^PHN-TRANSFERRED,<connection id>'"
• Variable:
connection id: The identifying number of the connection.
• Example:
^PHN-TRANSFERRED,1
The panel sent a command status to the master indicating call 1 was transferred.
Programming
131