Navigation Buttons; Protected Setup Pages - AMX MVP-5100 Operation/Reference Manual

Setup Pages
Setup Page (Cont.)
Connection Status:
Panel Brightness:
Inactivity Page Flip
Timeout:

Navigation Buttons

The following Navigation buttons (FIG. 38) appear on the left side of the Setup page:
FIG. 38 Setup Page Navigation Buttons

Protected Setup Pages

Information on the Protected Setup pages is available on page 53.
44
Displays whether the panel has external communication, as well as the
encryption status of the Master, the connection type ( Ethernet or USB ), and to
which System the panel is connected.
• Until a connection is established, the message displayed is: " Attempting via
Ethernet " or " Attempting via USB ".
• When a connection is established, the message displayed is either: " Connected
via Ethernet "or " Connected via USB ".
• The word " Encrypted " appears when an encrypted connection is established with
a NetLinx Master.
Note: The panel must be rebooted before incorporating any panel communication
changes and to detect Ethernet connections.
Sets the display brightness levels of the panel.
• Press the Brightness Up/Down buttons to adjust the brightness level.
Range = 0 - 100.
NOTE: Be careful not to turn down the brightness too low to be able to see the
Setup page.
Indicates the length of time that the panel can remain idle before automatically
flipping to a pre-selected page.
• Press the Up/Down buttons to increase/decrease the Inactivity Page Flip
Timeout setting. Range = 0 - 240 (minutes).
• Set the timeout value to 0 to disable Inactivity Page Flip mode.
Note: The touch panel page used for the Inactivity page flip is named within a
small Inactivity Page field below the buttons.
Press to access the Protected Setup pages.
Press to access the Project Information page in order to view information on
the TPDesign file being used, and Panel Information page in order to view
panel specific information such as resolution and memory.
Press to access the Time page in order to alter the time and date settings on
the Master.
Press to access the Audio page in order to adjust audio parameters
on the panel.
Press to access the Battery page in order to monitor battery status in
the panel.
MVP-5100/5150 5.2" Modero Viewpoint Touch Panels