Modero Setup And System Settings; Accessing The Setup And Protected Setup Pages; Setting The Panel's Device Number; Wireless Settings - Wireless Access Overview - AMX MVP-9000i-GB Instruction Manual

Modero Setup and System Settings

All AMX Modero panels, including the MVP-9000i, feature on-board Setup pages. Use the options in the Setup pages to access
panel information and make various configuration changes.

Accessing the Setup and Protected Setup Pages

1. At any time, hold the bottom left capacitive touch button and the bottom of the directional pad for 3 seconds. Alternately,
press the Reset button on the left side of the device and hold it for 6 seconds. (For more information, please refer to the
Accessing the Setup pages section on page 45.) This opens the Setup page (FIG. 22).
Setup page
FIG. 22
2. Press the Protected button. This opens a popup keypad for password entry. Enter the device's password and press Done to
proceed to the Protected Setup page (FIG. 23).
Protected Setup password popup window
FIG. 23
NOTE: The default password for the Protected Setup page is 1988, but this may be changed at any time.
For more information on the Setup and Protected Setup pages, refer to the Setup Pages section on page 45 and the Protected Setup
Pages section on page 55.

Setting the Panel's Device Number

In the Protected Setup page:
1. Press the Device Number field in the Device Information section to open the Device Number keypad.
2. Enter a unique Device Number assignment for the device, and press Done to return to the Protected Setup page. The Device
Number default is 0.
3. From the Setup page, press Reboot to reboot the device and apply the new Device Number.

Wireless Settings - Wireless Access Overview

DHCP

When choosing DHCP, a DHCP server must be accessible before the IP, subnet, and gateway fields are populated.
The parameters of the wireless card must be set before selecting the Master Connection Type. The Access Point communication
parameters must match those of the pre-installed wireless CF card inside the device.
MVP touch panels connect to a wireless network through the use of a pre-installed AMX 802.11a/b/g wireless interface card. This
allows users to communicate via a wireless LAN. For a more detailed explanation of the new security and encryption technology,
refer to the Appendix B: Wireless Technology section on page 144.
For more information on utilizing the AMX Certificate Upload Utility in conjunction with the EAP security, refer to the AMX
Certif icate Upload Utility section on page 148.
MVP-9000i - Instruction Manual
Configuring Communication
31