Panel Information Page - Config; Panel Information Page - File - AMX MVP-9000i-GB Instruction Manual

Panel Information Page - Conf ig
The Conf ig tab provides information on the panel's configuration (FIG. 61). :

Panel Information Page - Config

FIG. 61
Panel Information Page - Conf ig
Back:
WiFi/Wired icon:
Connection Status
icon:
Start Up String:
Wake Up String:
Sleep String:
Standby String:
Shutdown String:
High Port:
High Address:
High Channel:
High Level:
Cradle Channel:
Cradle Port:
Battery Level:
Battery Port:
Power Up Page:

Panel Information Page - File

The File tab displays information on the particular TPDesign4 file used by the panel.
Panel Information page - File
FIG. 62
Panel Information Page - File
Back:
WiFi/Wired icon:
MVP-9000i - Instruction Manual
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless
(image of a radio antenna) or Wired (image of three networked computers).
The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection
status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
Displays the start-up string.
Displays the wake up string used after an activation from a timeout.
Displays the sleep string used during a panel's Sleep mode.
Displays the standby string used during a panel's Standby mode.
Displays the shutdown string used during a panel's Shutdown mode.
Displays the high port (port count) value for the panel.
Displays the high address (address count) value for the panel.
Displays the high channel (channel count) value for the panel.
Displays the high level (level count) value being used by the panel.
Displays the cradle channel (channel count) value being used by the panel.
Displays the cradle port (port count) value for the panel.
Displays the battery level (level count) value for the panel.
Displays the battery port (port count) value for the panel.
Displays the page assigned to display after the panel is powered-up.
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless
(image of a radio antenna) or Wired (image of three networked computers).
Setup Pages
53