Page Commands; Apg; Cpg; Dpg - AMX MVP-9000i-GB Instruction Manual

Page Commands

These Page Commands are used in NetLinx Programming Language and are case insensitive.
Page Commands

@APG

Add the popup page to a group if it does not already exist. If the new popup is added to a group which has a popup displayed on
the current page along with the new pop-up, the displayed popup will be hidden and the new popup will be displayed.
Syntax:
Variable:
Example:

@CPG

Clear all popup pages from specified popup group.
Syntax:
Variable:
Example:

@DPG

Delete a specific popup page from specified popup group if it exists.
Syntax:
Variable:
Example:

@PDR

Set the popup location reset flag. If the flag is set, the popup will return to its default location on show instead of its last drag
location.
Syntax:
Variable:
Example:

@PHE

Set the hide effect for the specified popup page to the named hide effect.
Syntax:
Variable:
Example:

@PHP

Set the hide effect position. Only 1 coordinate is ever needed for an effect; however, the command will specify both. This
command sets the location at which the effect will end at.
Syntax:
Variable:
Example:
MVP-9000i - Instruction Manual
"'@APG-<popup page name>;<popup group name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
popup group name = 1 - 50 ASCII characters. Name of the popup group.
SEND_COMMAND Panel,"'@APG-Popup1;Group1'"
Adds the popup page 'Popup1' to the popup group 'Group1'.
"'@CPG-<popup group name>'"
popup group name = 1 - 50 ASCII characters. Name of the popup group.
SEND_COMMAND Panel,"'@CPG-Group1'"
Clears all popup pages from the popup group 'Group1'.
"'@DPG-<popup page name>;<popup group name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
popup group name = 1 - 50 ASCII characters. Name of the popup group.
SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
Deletes the popup page 'Popup1' from the popup group 'Group1'.
"'@PDR-<popup page name>;<reset flag>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
reset flag = 1 = Enable reset flag
0 = Disable reset flag
SEND_COMMAND Panel,"'@PDR-Popup1;1'"
Popup1 will return to its default location when turned On.
"'@PHE-<popup page name>;<hide effect name>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
hide effect name = Refers to the popup effect names being used.
SEND_COMMAND Panel,"'@PHE-Popup1;Slide to Left'"
Sets the Popup1 hide effect name to 'Slide to Left'.
"'@PHP-<popup page name>;<x coordinate>,<y coordinate>'"
popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PHP-Popup1;75,0'"
Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.
Programming
91