Protected Setup Pages; Overview - AMX MVP-9000i-GB Instruction Manual

Protected Setup Pages

Overview

The Protected Setup page (FIG. 64) provides secured access to advanced panel configuration options, including communication
and security settings. The Protected Setup page is accessed through the Setup page (please refer to the Setup Pages on page 45).
Protected Setup page showing default values
FIG. 64
To access the Protected Setup pages:
1. From the Setup page, select the Protected button on the left side of the screen. This opens the password keypad (FIG. 65).
2. Enter the factory default password (1988) into the password keypad to access the page.
Protected Settings page password keypad
FIG. 65
NOTE: This password may be changed later through the Passwords on page 73.
Protected Setup Page
Back:
WiFi/Wired icon:
Connection Status
icon:
Navigation Buttons: The buttons along on the left side of the page provide access to secondary Protected Setup pages (see following
Device Number:
Device Name
Options:
The nine buttons include:
Network: this button opens the System Settings page (page 58)

Calibration: this button opens the Calibrate page (page 72)

G4 Web Control: this button opens the G4 Web Control Settings page (page 73)

Passwords: this button opens the Passwords page (page 75)

Logs: this button opens the Panel Logs page (page 75)

Cache: this button opens the Cache Settings page (page 75)

Statistics: this button opens the Panel Statistics page (page 76)

Connection Test: this button opens the Connection Utility page (page 78)

SIP: this button opens the SIP Settings page (page 79)

MVP-9000i - Instruction Manual
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless
(image of a radio antenna) or Wired (image of three networked computers).
The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current
connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
sections).
Opens a keypad used to view or change the device number of the panel.
Opens a keypad used to view or change the device name used for the panel.
Opens the System & Panel Options page (page 56).
Protected Setup Pages
55