Navigation Buttons; Protected Setup Pages; Information Button - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Navigation Buttons

The following Navigation buttons (FIG. 48) appear on the left side of the Setup page:
FIG. 48 Setup Page Navigation Buttons

Protected Setup Pages

Information on the Protected Setup pages is available on page 53.

Information Button

The Information button allows access of both the Project Information page, which contains data on the
TPDesign4 file being used with the MVP-5200i, and the Panel Information page, which contains detailed
information on the panel itself. To access these pages:
1.
Press and hold the Information button until the Project Information button and the Panel Information
button slide from the left.
The Project Information and the Panel Information buttons will be displayed for
three seconds before they slide back behind the Information button, whether or not
the Information button is still being pressed.
2.
Press the appropriate button for the information required.
3.
To return to the Setup page, press the Back button.
MVP-5200i 5.2" Modero® ViewPoint® Touch Panel with Intercom
Press to access the Protected Setup pages.
Press to access the Project Information page in order to view information on
the TPDesign file being used, and Panel Information page in order to view
panel specific information such as resolution and memory.
Press to access the Time page in order to alter the time and date settings on
the Master.
Press to access the Audio page in order to adjust audio parameters
on the panel.
Press to access the Battery page in order to monitor battery status in
the panel.
Setup Pages
45