Choose a Comfort Panel from the list that you want to identify. You can play a war-
ning signal either of a certain length or until confirmation at the Comfort Panel. Click
Identify
and you can locate the Comfort Panel on the basis of the warning tone.
18
Import / export data
There are corresponding functions in IP-Project for importing or exporting group addresses and
translation tables.
Other elements (e.g. room images, pages, symbols, function modules and logic modules) can
also be integrated, but must be copied to the corresponding program directory of IP-Project.
18.1
→ Import / export group addresses
99/240
17.3.4
Close Project
Close the open project via Project > Close project in the
menu, close the entire program via Project > Close IP-
Project.
If you have enabled the Show dialog "Project History" on
exit checkbox via Project > Project Information... in the
History tab, you can review and edit the change history
when exiting.
18.1.1
Import group addresses
The dialog for importing group addresses is available via
Project > Import group addresses in the menu. Group
addresses can be loaded into IP-Project from any directory
or drive.
Select a file in the dialog and load it into IP-project by
clicking Open.
Please note:
Unregistered group addresses cannot be im-
ported.
Imported group addresses cannot be changed
in IP-Project.