Extended Settings; Multiplexer Details; Behaviour; Conversion Table - Busch-Jaeger Busch-ComfortTouch Product Manual

20.3.47 Multiplexer details

20.3.47.1 Behaviour

If this module receives a value via one of the up to eight inputs (Input 0 to 7), it outputs this
value on the Output 0. The value of the Input 8 specifies which input is to react to incoming
values. If an invalid value is received on Input 8, no new input is selected. Once a new input is
selected, the last received value there is output on Output 0.
The data type of the Input 8 is Number. If necessary, incoming values are converted before the
calculation (see conversion table below).

20.3.47.2 Extended settings

Smallest Index
Via the

the outputs should start with 0 or with 1.
Number of inputs
Via the

available.
Only send with change
Via the

value shall only be sent if the current input value is different from the previously
received input value.

20.3.47.3 Conversion table

Number
(converted)
true
Boolean
false
Number ---
DPTTime Milliseconds
235/240
parameter, you can specify whether the numbering of
parameter, you can specify how many inputs shall be
parameter, you can specify whether an output
1
→
0
→