Setting The Simulated Presence; Configuring Recording Channels - Busch-Jaeger Busch-ComfortTouch Product Manual

129/240
In recording mode the current events of the day are written
in the memory. Under no circumstances is the existing day
(today a week ago) immediately deleted. During the chan-
geover to the following weekday the current day in place
of the day a week ago is stored.
Playback mode:
In the playback mode the values stored after starting time
(a week ago today) are transmitted to the Bus precisely to
the minute. These are transferred parallel to the relevant
current day and, together with the values that have been
recorded up to now, form the basis for saving at the chan-
geover of the day.
If during playback no values have been recorded for a day
in the first week of recording, the simulated absence sear-
ches a stored period and starts the playback. This makes
values for playback available also after the recording peri-
od of one day.
If the playback mode is exited, the function returns to the
recording mode and continues to fill the memory of the
current day.

19.9.12 Setting the simulated presence

If simulated presence has been activated, the user has the
option of editing this function directly on the Comfort Pa-
nel. It would be practical to pre-configure simulated pre-
sence in the IP project. The respective editor can be called
up in the parameter section of the Comfort Panel via the
button Simulated presence or via the menu under Comfort
Panel > Optional software modules > Simulated presence.
Note:
The editor for simulated presence can only be called up if
this software module has been previously activated (see
Activating additional
19.9.12.1 Configuring recording
channels
In the editor the recording channels can be configured and
equipped with group addresses. This defines the processes
the Comfort Panel is to record during presence and play
back during absence. The editor consists of the following
sectors:
In the Library sector the group addresses

are handled the same as in the IP main pro-
ject window; however, they cannot be edited
applications).