Extended Settings; Conversion Table; Lock Details; Behaviour - Busch-Jaeger Busch-ComfortTouch Product Manual

20.3.42 Lock details

20.3.42.1 Behaviour

Every value (regardless of which data type) received via the Input 0, is immediately output
again on Output 0 by this module, provided it is not locked. If the module is locked, received
values are blocked until the module is opened again. When the module is opened the last recei-
ved value is output. The lock can be activated and cancelled via the Input 1 .
The data type of the Input 1 is Boolean. If necessary, incoming values are converted before the
calculation (see conversion table below).

20.3.42.2 Extended settings

Operating mode
Via the

activated by receipt of the value 0 or via the
Only send with change
Via the

value shall only be sent if the current input value is different from the previously
received input value.

20.3.42.3 Conversion table

Boolean
(converted)
Boolean ---
0
Number
≠ 0
DPTTime true
DPTDate true
"0" or ""
String
other
03_03_09_00_EN.html - Signalkontrolle
225/240
parameter, you can specify whether the lock shall be
true
→
false
→
false
→
→ true
Input 1
parameter, you can specify whether an output
.