Display\Display brightness
Display\Enable status for backlight
Display\Backlight status
User preferences\Temperature unit
19.15.2
selection
This 1-bit communication object can be used to switch the unit
for temperature between Celsius and Fahrenheit. A switch-off
telegram activates the unit °C and a switch-on telegram the unit
F.
User preferences\User language
19.15.3
This 1-byte communication object is used to change the User lan-
guage via the Bus.
User preferences\Room
19.15.4
temperature
This communication object is available only when the indoor
temperature sensor of the Comfort Panel is not to be used and
parameter Room temperature sensor has been set on External (see
Configuring the temperature display in the status bar of the Com-
fort
Panel).
Via this 2-byte communication object the indoor temperature is
received from an outdoor temperature sensor.
User preferences\Outdoor
19.15.5
temperature
Via this 2-byte communication object the temperature is received
from an outdoor temperature sensor.
Screen saver\Screen saver on/off
19.15.6
This 1-bit communication object is used to switch the scree saver
off and on externally. The receipt of a switch-on telegram activa-
tes the screen saver and a switch-off telegram deactivates it.
Note:
The time set under parameter Display screen saver only expires
after the receipt of a switch-on telegram.
Screen saver\Screen saver status
19.15.7
138/240