Table of Contents
Advertisement
6.2.2
Installation sequence
An installation wizard will assist you with the installation of the ETS3 macro for the
Busch Comfort Panel. This is started by double-clicking on the "Macros.exe" file and
can run in either German or English.
6.2.3
Integration of the Busch Comfort Panel in the ETS3
Start the ETS3 and import the product data of the Busch Comfort Panel ".vd4-file" via
the import function of the ETS3 into the project database.
7
Comfort Panel IP Project software
7.1
Recommended sequence of a project planning
The following working sequence (standard workflow) is recommended for working most
effectively with the IP Project software:
1.
Start the software and create a new project (project info, name panel, ...).
2.
If the ETS3 project already exists, import the group addresses already created
there into IP Project udn weisen Sie den richtigen Datenpunkttyp (DPT) allen im
Busch-ComfortTouch verwendeten Gruppenadressen zu (z.B. Funktion 1.001
Switch)
3.
Configure the panel (basic settings, feed reader, web browser,
...).
42/240
Advertisement
Table of Contents
