19.10
→ Configuring the acoustic signals of the Comfort Panel
19.11
→ Setting separators
19.10.1 Configuring the welcome
signal
A welcoming signal can be played at the start of the Com-
fort Panel. To do this go to User preferences and in tab
Basis activate checkbox Activate welcome signal.
If you wish to change the welcome signal, select a diffe-
rent one under Welcome signal.
19.10.2 Configuring button signal
When actuating a button an acoustic signal can be played
by the Comfort Panel.
Any kind of signal tone can be set in the list Activate
acoustic signal for buttons under User preferences in tab
Basis. This function can be deactivated with No.
19.11.1 Setting decimal separators
Under User preferences in tab Basis and by means of pa-
rameter Decimal separators you can set whether a comma
(German separator) or a point (English separator) is to be
used as decimal separator.
19.11.2 Setting the thousands
separator
Under User preferences in tab Basis and by means of pa-
rameter Thousands separators you can set whether thou-
sands are to separated with a comma (English separator) or
a point (German separator).
134/240