Lan / Wlan Settings; Settings For Wlan - Busch-Jaeger Busch-ComfortTouch Product Manual

Table of Contents

Advertisement

119/240
the web site of the respective provider.
Secondary DNS
Here an IP address of a second DNS server
can be entered, if this is offered by the Inter-
net provider. The entry is optional. However, it
increases safety since web sites can be acces-
sed if the first DNS server fails.
Note:
A network administrator should used for these set-
tings. Incorrect or inadequate manual settings lead
to malfunctions.
19.6.2

LAN / WLAN settings

Selection of LAN adapter
This parameter can be used to set if you wish to use
a local network, or if it should be available. If yes,
here you can set whether you use a cable-connected
LAN
(Local Are Network) or a
radio network). If not, select
19.6.2.1 Settings for
WLAN SSID
:
Here the name of the WLAN is entered. If ne-
cessary, the configuration menu of the WLAN
router must be called up or a network admi-
nistrator called in.
WLAN encryption type
Here the encryption type none, WEP, WPA or
WPA2 of the WLAN is entered. If necessary,
the configuration menu of the WLAN router
must be called up or a network administrator
contacted.
WLAN key
:
This parameter can only be set when at
encryption type Off
The name of the text file that contains the
WLAN key is entered here. This an alphanu-
meric character chain as a rule. The length is
dependent on the encryption type. If necessa-
ry, the configuration menu of the WLAN router
must be called up or the network administra-
:
:
WLAN
(wireless LAN,
No LAN
.
WLAN
:
:
has not been selected.
WLAN

Advertisement

Table of Contents
loading

Table of Contents