Table of Contents
Advertisement
These settings can be made in selection list Date format which is located in dialogue Basic set-
tings under Time and date.
19.3.3
Send/receive time
The Comfort Panel has an internal Date/Time module. The following can be selected via para-
meter Send and receive Time/Date,
whether time and date are to be used only internally (no send and no receive),
whether the Comfort Panel is to synchronize further KNX components in the
system (sending, but not receiving) or
whether the Comfort is to be updated with a KNX-DCF module (receiving, but
not sending).
If you select one of the last two options you can synchronize the time and date via a Communi-
cation object by sending a Group address to or from the Comfort Panel. To do this select the
Comfort Panel in the work area of the Comfort Panel level and open the Objects tab there. Link
the communication objects Time and date / time and Time and date / date with a group address
(see
Group address
assignment).
These settings can be made in selection list Send and receive time /date which is located in
dialogue Basic settings under Time and date.
19.3.4
Setting the time zone
The local time zone (e.g. GMT+1 time zone Berlin, Paris) can be set in the selection
Time zone
list
in dialogue
19.3.5
Configuring time synchronisation
The synchronisation can be configured via external time generators in dialogue Basic settings
under tab Basis. This enables you to ensure that all Comfort Panels in one home display the
same time.
19.3.5.1 Activating / deactivating synchronisation
Parameter Time synchronisation is used for setting whether the date and time of the Comfort
Panel are to be synchronised with an external time generator.
Select KNX if synchronisation is to take place via a KNX-DCF module. Select NTP if synchro-
nisation is to take place via a Time server. in the Internet with the aid of the NTP protocol. If
no synchronisation is required please select No synchronisation.
19.3.5.2 Setting time server URL
The Time servers for synchronising the date and time of the Comfort Panel is set via parameter
Primary time server URLand Secondary time server URL.
Basic settings
under
Time and date
.
104/240
Advertisement
Table of Contents
