20.3.39 Delayer details
20.3.39.1 Behaviour
The module outputs every received value of the Input 0 again after expiry of a specific delay
time on the Output 0. The delay time (in seconds) is defined via the Input 1. If an invalid delay
time is specified (e.g. -1), the result 1 (logical "true") is output on the Output 1.
The data type of the Input 1 is Number. If necessary, incoming values are converted before the
calculation (see conversion table below).
20.3.39.2 Extended settings
This module has no additional setting options.
20.3.39.3 Conversion table
Number
(converted)
true
Boolean
false
Number ---
Milliseconds
DPTTime
since 1.1.1970
DPTDate Number
Number, if possible;
String
otherwise 0
03_03_09_00_EN.html - Signalkontrolle
03_03_09_00_EN.html - Signalkontrolle
1
→
→
0
220/240