20.3.40 On/Off delayer details
20.3.40.1 Behaviour
The module is a special case of the delayer for binary input values. If a value is received via the
Input 0, this value is output on the Output 0 after a delay time. The delay time (in seconds) is
dependent on the binary input value:
If the value 1 (logical "true") is received via the
ned via the value at
If the value 0 (logical "false") is received via the
ned via the value at
If invalid delay times are specified (e.g. -1), the result 1 (logical "true") is output on the Output
1.
The data type of the Input 0 is Boolean, the data types of the Inputs 1 and 2 are Number. If ne-
cessary, incoming values are converted before the calculation (see conversion table below).
20.3.40.2 Extended settings
This module has no additional setting options.
20.3.40.3 Conversion table
Boolean
(converted)
Boolean ---
0
Number
≠ 0
DPTTime true
DPTDate true
String
"0" or "" → false Number, if possible;
221/240
Input 1
.
Input 2
.
Number
(converted)
true
false
true
→
---
→
false
Milliseconds
since 1.1.1970
Number
Input 0
Input 0
1
→
→
0
, the delay time is defi-
, the delay time is defi-