Change Element Symbols; Change Element Parameters - Busch-Jaeger Busch-ComfortTouch Product Manual

14.7

→ Change element symbols

14.8

→ Change element parameters

You can change the following symbols:
Navigation bar symbol from operating pages that

are not in a container
Watermarks from operating pages in a container

(if watermark symbols are enabled, see
Panel design)
Navigation bar symbols from open containers

Watermarks from scene control elements

(if watermark symbols are enabled, see
Panel design)
Button symbols from control elements

Symbol
(if is selected as the label type - see
Configure control
You can select symbols in the respective parameter area using the
Browse button directly or in the dialog for advanced settings. Click
the Advanced Settings button of the respective parameter area to
open.
Each element in the working area has certain parameters.
The most important parameters are displayed in the para-
meter area for the selected element (e.g. the page title of an
operating page).
You can change other parameters as follows:
For the advanced settings of a selected Com-

fort Panel, please click the
button in the parameter area (see
fort Panel basic
For the settings of a selected application

page, please click the
ton in the parameter area (see
plication
For the advanced settings of a selected

control element, please click the
Settings
Configure control
elements)
settings).
Advanced Settings
pages).
button in the parameter area (see
elements).
Set Comfort
Set Comfort
Default Settings
Edit Com-
but-
Configure ap-
Advanced
90/240