Table of Contents
Advertisement
127/240
Note:
The default setting for access control is deactivated.
19.9.9
Activating the web browser
For the use of Internet-based services (feeds, web radio,
etc.) connection settings may possibly need to be made.
For example, if you use a proxy server, you can enter this
using the web browser configuration.
19.9.10 Configuring the web browser
In the list on the left side of the Parameter dialog, you can
find the following setting options under the Web browser
entry:
19.9.10.1 Start page
Via the parameter Homepage URL, the preferred website
can be entered as start page (e.g. http://www.busch-
jaeger.de/).
19.9.10.2 Proxy mode
You can select the proxy mode via the Proxy mode parame-
ter:
Direct Internet connection
In this case, the function of the proxy server is
not used.
Manual proxy settings
This setting must be selected if the data for the
proxy server is to be entered manually.
In some networks a proxy server is used in order to check
Internet traffic or the Internet provider offers a proxy server
service. A proxy server is used among other things, to hide
IP addresses from the Internet, to connect special devices
with the Internet or to check the information from the Inter-
net for security, e.g. viruses.
Your network administrator can help you with the settings
if necessary.
19.9.10.3 HTTP proxy address
Via the HTTP proxy address parameter, the address of the
proxy server is specified, e.g. as IP address or as host name.
Advertisement
Table of Contents
