Table of Contents
Advertisement
values for playback available also after the recording peri-
od of one day.
If the playback mode is exited, the function returns to the
recording mode and continues to fill the memory of the
current day.
19.9.3
Activating access control
Access control does not have a visible application page on
the Comfort Panel. It is therefore activated via dialogue
Basic settings. This setting is located in view Additional
applications in field Access control. Access control is acti-
ve when Yes is selected.
Note:
The default setting for access control is active.
19.9.4
Configuring access control
Certain areas of the Comfort Panel can be equipped with
access protection. This is displayed on the Comfort Panel
by means of a small lock icon next to the respective head-
line of the page or the operating element. When actuating
the button the user must first enter a four-digit code to
trigger the function.
Different user levels can be created for the access control
with the editor and the relevant four-digit security number
(PIN) can be set. You can also assign a user level to indi-
vidual pages and control elements in the Comfort panel.
The pages and control elements can then only be operated
with the respective user level.
Note:
As alternative to the central assignment of access rights to
the individual pages and functions (via the editor for ac-
cess control) you can also make these settings directly on
the elements. If, for example, you wish to assign access
protection to an operating element, you can do this by
means of parameter User level in the settings dialogue
Extended settings in the parameter sector of the respective
operating element.
19.9.5
Activating the camera module
The Comfort Panel can be expanded with a camera module
offering the user additional areas of application. This al-
lows the Intercom, Video monitoring and Baby phone ap-
plications to be used with a video image.
124/240
Advertisement
Table of Contents
