Table of Contents
Advertisement
Perform consistency check
17
Manage project
You can define the configuration for one or more Comfort Panels in a project. Only one project
can be open in IP-Project at one time.
The online help describes basic project management in IP-Project - from creating new projects
to saving and transferring finished projects to a Comfort Panel in the network.
17.1
→ Start project
95/240
17.1.1
Create new project
Project > New
Go to
toolbar to create a new project. Enter a project name
in the dialog under
gests this as the file name when saving, a meaning-
ful project name is already suggested.
If you wish, you can save additional information
about the project in the
You can also save additional information later (see
Edit project
information). Remember that only one
project can be open at any one time. If you already
have a project open, you are prompted to save the
changes.
You can create one or more Comfort Panels in the
Comfort Panel
area. Select the Comfort Panel type
(e.g. "Comfort Comfort Panel"), enter a Comfort Pa-
nel name (e.g. "Comfort Panel Kitchen") and if ne-
cessary, information about the installation location
(e.g. "next to the refrigerator").
Add
You can use the
fort Panels. You can also add additional Comfort Pa-
nels later (see
Insert Comfort
in the menu or click
Project
. Because IP-Project sug-
Project
Customer
and
button to add additional Com-
Panel).
in the
areas.
Advertisement
Table of Contents
