Import / Export Other Data; Editing The Basic Settings Of The Busch Comfort Panel; Setting The Design Of The Comfort Panel; Changing The Skin - Busch-Jaeger Busch-ComfortTouch Product Manual

18.3

→ Import / export other data

19

Editing the basic settings of the Busch Comfort Panel

The basic settings for the Comfort Panel can be edited in the settings dialogue Basic settings.
This dialogue can be accessed via the button Default settings in the parameter section and via
via Comfort Panel > Default settings in the menu:
when the required Comfort Panel is marked in the Project level or

when no other element is marked on the Navigation level.

19.1

→ Setting the design of the Comfort Panel

19.1.2

Setting watermarks for scenes on the control element

Watermarks can be added to control and navigation elements. They serve as decoration and
highlight the element's overriding application or its intended use for the room.
To set the watermark open the dialogue Basic settings. The selection list Available watermarks
is accessed via User preferences and tab Basis. Select Yes to activate the display of watermarks
for the entire Comfort Panel.
The default setting for the display of watermarks is active.
Note:
Watermarks for scenes can only be activated/deactivated for the entire Comfort Panel, not for
individual control elements. Nor is it it possible to change the motif of a watermark.
101/240
19.1.1

Changing the skin

The appearance of the Comfort Panel surface can be chan-
ged via Design. Three different designs are available. The
presetting of the screen surface is blue. Alternative settings
are a black or a bright appearance.
Open the settings dialogue Basic settings by selecting the
button Default settings in the
> Default settings in the menu. Then select the entry User
preferences on the left in the dialogue. The field Design
selection is accessed with tab Basis. Here you can select
one of the three designs for the Comfort Panel. Confirm
your entry with OK.
Parameter sector or Project