Table of Contents
Advertisement
8
Getting started - a first project
The following sample project will show you how to work with the IP Project software.
8.1
Project start
First, start the IP Project program on the hard drive of your computer and use the "New
project" button to call up the start mask for a new project.
8.2
Importing of group addresses
If group addresses were created in an ETS3 project which are also to be used in the
Busch Comfort Panel, you can read these in again here after an export from the ETS3.
To do this, you need to specify the corresponding file path in the upper area of the in-
put window.
48/240
Advertisement
Table of Contents
