Table of Contents
Advertisement
nel or whether only selected persons are permitted to do so. If you wish to attach Access pro-
tection to the time setting, then select a User level between 1 and 8, with level 8 having the
highest access protection.
Note:
Please note that you must first create the user levels in the editor for the Access protection be-
fore they can be assigned!
19.4
→ Setting screen saver and time intervals
19.4.1
Setting time interval for return
to the start page
By default the Comfort Panel automatically returns to the
welcome screen 60 seconds after the last press of a button.
You can change this time period. You can deactivate this
function, which has the effect that the Comfort Panel re-
mains on the current screen view up to the next press of a
button.
In dialogue Basic settings select the entry User preferences
and there the tab Maintenance. This view contains the
checkbox Activate automatic return to welcome screen,
which is used to set whether the Comfort Panel is to auto-
matically return to the start page after a set time period
without an input from the user.
The duration of this period can be set in field Return after
(10, 3600). It is specified in seconds.
Note:
The time period for the return to the start page usually re-
ceives a lower value than the period for activating the
Screen
saver; however, both values can be set indepen-
dently.
19.4.2
Setting time interval for return
to the screen saver
You can set whether the screen saver is to switch itself on
after a defined time period when the Comfort Panel is acti-
vated for this period.
In the dialogue Basic settings navigate to the view Screen
saver. In the selection field Show screen saver you can
select time intervals from 5 to 120 minutes. If the screen
saver should not switch itself on, select No screen saver.
106/240
Advertisement
Table of Contents
