Table of Contents
Advertisement
20.3.46 Demultiplexer details
20.3.46.1 Behaviour
If this module receives a value via the Input 0, it on one of up to eight outputs (Outputs 0 to 7.
The value of the Input 1 specifies which output is to be selected. If an invalid value is received
on Input 1, no new output is selected.
The data type of the Input 1 is Number. If necessary, incoming values are converted before the
calculation (see conversion table below).
20.3.46.2 Extended settings
Smallest Index
Via the
the outputs should start with 0 or with 1.
Number of outputs
Via the
be available.
Only send with change
Via the
value shall only be sent if the current input value is different from the previously
received input value.
20.3.46.3 Conversion table
Number
(converted)
true
Boolean
false
Number ---
Milliseconds
DPTTime
since 1.1.1970
DPTDate Number
233/240
parameter, you can specify whether the numbering of
parameter, you can specify how many outputs shall
parameter, you can specify whether an output
1
→
→
0
Advertisement
Table of Contents
