Table of Contents
Advertisement
Detected inconsistencies will be devided into „serious inconsistecies" that have to be
removed before transferring the project to a Busch-ComfortTouch and "less serious
inconsistencies", that should be removed, but don't have influence to the functionality.
7.4
Downloading project into panel
If the project with the IP Project software is finished, it can be loaded into the Busch
Comfort Panel. You will find the entry "Load project" under the "Project" menu item in
the IP Project software. If you select this entry, the following appears on the screen:
If you have configured multiple panels at the same time in a project file of the IP soft-
ware, you can select which of these panels you would like to install first.
You then provide the installation path. If the panel is connected with the PC (USB,
LAN, WLAN,...), the data can be transferred directly to the panel after successful iden-
tification by the software. Alternatively, an installation via memory card (SD-card or
USB stick) is possible. To do this, select the "Save to file system" option and specify
the corresponding storage location there.
You can then subsequently read in the exported project data again after clicking on the
"System" button and selecting the "Import" option.
47/240
Advertisement
Table of Contents
