Table of Contents
Advertisement
17.1.2
Open project
You can open an existing project from any storage
Project > Open...
medium via
cking
in the toolbar. Select an IP-Project file in the
.ipp
dialog (
extension) and confirm your selection by
Open
clicking
.
Remember that only one project can be open at any
one time. If you already have a project open, you are
prompted to save the changes.
17.1.3
Insert Comfort Panel
You can add additional Comfort Panels at any time
Project > Insert Comfort Panel
via
Overview
clicking
in the
17.1.4
Download project from
Comfort Panel
(Commissioning)
You can download a project from a Comfort Panel via
Project > Download Project in the menu and by clicking
in the toolbar. Select the Comfort Panel that you want to
download from your project in the dialog under Choose a
Comfort Panel. You can then select between downloading
from the Comfort Panel via a network connection or a mo-
bile storage medium (USB stick, memory card).
If you want to use the network option, ensure that a net-
work connection to the Comfort Panel exists. Select the
From device option and then select the device from the
list. You can use the identification function to locate the
correct Comfort Panel (see
Download Project to start the transfer.
If you want to use a storage medium, select the Load from
file system option and enter a storage location. Click
Download project from ...Upload to save the file to the
in the menu or by cli-
in the menu or by
section of the library area.
Identify Comfort
Panel). Click
96/240
Advertisement
Table of Contents
