Table of Contents
Advertisement
77/240
Comfort Panel. Depending on whether you are creating
the Comfort Panel navigation or you want to add control
elements to a page, theElements section contains the
respective elements (see
Configure
pages).
You can save pages and control elements as templates in
IP-Project so you can reuse them later (see
and
references). The templates are then found in the bot-
tom My Templates tab.
You can also find so-called cross references in the Ele-
ments section that are explained in detail in the
templates and references
Actions
13.1.1.3
You can manage group addresses in the Actions section
and link to the communication objects of a control element
from there (see
Configure control
no group addresses, you must either import existing group
addresses (see
Import / export group addresses
new ones (see
Manage group
13.1.2
Working area
13.1.2.1 Clipboard
The top part of the working area is separated by a line.
Above the line is the clipboard area in which you can tem-
porarily store elements on the navigation and page level.
Drag an element from the bottom part of the working area
to the clipboard.
Note:
The elements in the clipboard do not go away even if IP-
Project is closed.
Control Elements
13.1.2.2
The Control Elements tab in the working area is the area
in which configuration primarily takes place. You combi-
ne elements (pages, containers, control elements, etc.) into
a Comfort Panel there. All elements are outlined to allow
you to assess the appearance of the final Comfort Panel
during the configuration.
The configuration of a Comfort Panel in IP-Project stret-
ches over three levels (see
Control Elements tab in the working area adjusts to the
Create navigation structure
Use templates
chapter.
section
elements). If there are
addresses).
tab
Levels in
IP-Project). The
or
Use
) or create
Advertisement
Table of Contents
