Table of Contents
Advertisement
8.6.1
Operating pages with floor plan or room view
If you select the "Room image" view (large view) under "Layout" in the parameters on
an operating page, you initially receive only a grey operating page. In this state, i.e.
without a room image, you can not yet place any operating elements on the screen.
If you would now like to load a room image (floor plan or room view), add these under
"Sketches" by clicking on the star button.
Please observe here that the maximum resolution of the file may not exceed 1178x636
pixels.
Once the room image has been loaded, a 3x4 field grid opens over it which you can
now use to place operating elements.
Up to six different room views with 3x4 field can be created on every operating page.
58/240
Advertisement
Table of Contents
