Table of Contents
Advertisement
20.3.34 Maximum value details
20.3.34.1 Behaviour
The module compares the values at the inputs and outputs the largest value on the Output 0 as
result.
If necessary, incoming values are converted into the internal data type of the module before the
comparison (see conversion table below). Thus, observe the selection of a correct internal data
type!
The comparison is dependent on the internal data type of the module and is executed in the fol-
lowing way:
Internal data
Comparison rule
type
Number
Nummer comparison 5, 3
Time
Time comparison
Date
Date comparison
String length compa-
String
rison
20.3.34.2 Extended settings
Internal data type
Via the
the module.
Number of inputs
Via the
Only send with change
Via the
value shall only be sent if the result of the calculation is different to the previ-
ously calculated result.
211/240
Example
16:00, 15:30
17.07.2009, 1.1.1970 →
"ComfortPanel",
"priOn"
parameter, you can specify the internal data type of
parameter, you can specify the number of inputs.
parameter, you can specify whether an output
Output 0
= 5
→
Output 0
= 04:00:00
→
PM
Output 0
= 17.07.09
Output 0
= "Comfort-
→
Panel"
Advertisement
Table of Contents
