Table of Contents
Advertisement
respective level as follows:
1. Project level:
Add Comfort Panel to the project in the top
level and make basic settings. The
Elements
tab in the working area shows a list
of all Comfort Panels added in the project.
2. Navigation level:
Create the navigation structure here by ad-
ding pages. The working area shows the four
sections of the navigation bar of the selected
Comfort Panel (plus another section which on-
ly includes the start page).
3. Page level:
Configure pages here by adding control ele-
ments or making application settings. The
Control Elements
shows the selected start, operating or applica-
tion pages.
Objects
13.1.2.3
The Objects tab in the working area is effectively the
"back" of Comfort Panel and control elements used to
establish a connection to actuators. Each Comfort Panel
and each control element has a number of so-called com-
munication objects that you can link to group addresses
(see
Edit Comfort Panel basic settings
control
elements).
The configuration of a Comfort Panel in IP-Project stret-
ches over three levels (see
jects tab in the working area adjusts to the respective level
as follows:
1. Project level:
You link Comfort Panel communication objects
to group addresses in the top level. The
jects
tab in the working area shows the com-
munication objects of all Comfort Panels in the
project.
2. Navigation level:
There is no
the navigation level.
3. Page level:
Here you link the communication objects of an
application page or the control elements to
group addresses. The
king area shows the communication objects of
tab in the working area
tab
or
Levels in
IP-Project). The Ob-
Objects
tab in the working area on
Objects
tab in the wor-
Control
Configure
Ob-
78/240
Advertisement
Table of Contents
