Fuji Xerox DocuCentre 9000 User Manual page 512

15 Problem Solving
Error Code
071-210
072-210
073-210
074-210
15
075-210
075-211
078-210
078-211
078-213
078-214
116-701
116-702
116-703
510
Category
C P S M O
[Cause]
[Remedy] Check the paper setting of Paper Tray 1 and power-
[Cause]
[Remedy] Check the paper setting of Paper Tray 2 and power-
[Cause]
[Remedy] Check the paper setting of Paper Tray 3 and power-
[Cause]
[Remedy] Check the paper setting of Paper Tray 4 and power-
[Cause]
[Remedy] Power-cycle the machine. If the tray is not improved by
[Cause]
[Remedy] Check the paper setting of Paper Trays 6 to 7 and
[Cause]
[Remedy] Power-cycle the machine. If the tray is not improved by
[Cause]
[Remedy] Print each side.
[Cause]
[Remedy] Check the print data.
[Cause]
[Remedy] Either confirm the print data, or click [Spool Settings] on
Cause and Remedy
Paper Tray 1 malfunctioned.
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 1 can be
used.
Paper Tray 2 malfunctioned.
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 2 can be
used.
Paper Tray 3 malfunctioned.
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 3 can be
used.
Paper Tray 4 malfunctioned.
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 4 can be
used.
Paper Tray 5 (bypass) malfunctioned.
performing the relevant remedy, Contact our Customer
Support Center.
High Capacity Feeder Tray (paper trays 6 to 7)
malfunctioned.
power-cycle the machine. If the trays are not improved
by performing the relevant remedy, contact our
Customer Support Center. Trays other than Paper Trays
6 to 7 can be used.
Paper Tray 5(bypass) malfunctioned.
performing the relevant remedy, contact our Customer
Support Center.
2 sided print could not be made.
Printing was performed using a substitute font.
An error occurred during PostScript processing.
the [Details] tab in the print driver to set bi-directional
communications off.